Download Adobe Flash Player
Moscow
Angarsk
Ussuriysk
 
Flexitanks - Connecting fittings

Flexitanks - Connecting fittings

Author:

 

Rating:
(votes: 1)

Connecting fittings

The charging valve of a flexitank involves the use of quick-release fittings Camlock. It is also known as Cam-lock, Kamlok or CQD (cam-type quick disconnect).

Cam-lock

Kinematics of the quick coupling

 

Product characteristics is to use two levers with the eccentric (cam) for the coupling and the annular groove of the adapter. The rings for a comfortable grip with your fingers are situated on the outside of the levers. This device provides a vibration-resistant connection coupling adapter with no additional fixing pin or other devices. Tightness is guaranteed when short of regulatory pressure by more than 2 times.

These fittings are made of stainless steel, bronze, aluminum and polypropylene. Scope and planned pressure determine the choice of material. The products are designed to operate at a temperature of - 30 °С … +230 °С.

Tightness is ensured by gaskets having different markings, depending on the application and temperature.

CQD

 

For connection to a flexitank boot flap Camlock tail docking with a hose (“Type C”) is used. If necessary, use a hose extensions connection type - type C + E. Camlock type DC is used to control the gate and seal cargo. The remaining variation Camlock serves as a handy tool in the set, with additional test, measurement and trunk equipment.

Specifications:

Material: Aluminum (AL), bronze (PR), stainless steel (SS), polypropylene (PP)

Diameter: 3/4 ”, 1”, 1 1/4 ”, 1 1/2 ”, 2”, 2 1/2”, 3”, 4”, 5”, 6”

 

Kamlok

 

Сamloсk is used in many different industries:

  • Production of beer, spirits and soft drinks
  • Manufacture of printing ink and ink
  • Production and transport of cement and other construction mixtures
  • Transportation of chemical liquids
  • Manufacture of vegetable and mineral oils
  • Production of oil-based paints
  • Fittings for receiving fuel at the gas station
  • Production and operation of road tankers
  • Shipbuilding
  • refining industry

 

Quick coupling cam-type

 

Hinge elements for installation of reinforced and thick-walled tubes.

Clamp force, brand ROBUST

Clamp force, brand ROBUST

Robust power clamps are used to connect hoses with high hardness (rigidness). May also be used in combination with hoses or reinforced with wire mesh in operating high-pressure and vacuum. Each power Robust clamp is made from stainless steel. Nuts, bolts and strip are galvanized separately. The thickness of protective coating is 10-14 micron. Clamps have power flare at the edges of the tape. Three welding points are used for nuts body fastening, which increases the rigidity of the assembly. These are the strongest ties among peers.